Direct-Fired Construction Heaters

The CH-Series “construction” heaters are designed for portability and versatility with high discharge temperatures and comparatively lower fan induction ratios. These direct-fired heaters work well in loose enclosures such as under concrete deck pours, masonry enclosures, and spot heat situations. Ideal for sites where only 115V power is available. Download

Download Printer-Friendly Spec Sheet

Construction Heater Application

CH-600

Equipment Features

  • Equipped with electronic flame supervision for safety.
  • Proof-of-air-flow control verifies proper air-flow before ignition can take place.
  • Remote thermostat automatically cycles from low to high fire to maintain desired room temperature.

CH-Series Application Photos

CH-Series Specifications

SPECIFICATIONS CH-300 CH-600 CH-1000 CH-1500
CH-300 CH-600 CH-1000 CH-1500
BTU / HR
MINIMUM
MAXIMUM
150,000
300,000
300,000
600,000
500,000
1,000,000
750,000
1,500,000
CFM 1,700 3,000 6,000 7,000
GAS CONNECTION
NATURAL GAS
PROPANE
1″ NPT
1 / 2″ NPT
1″ NPT
1 / 2″ NPT
1″ NPT
1 / 2″ NPT
1″ NPT
1″ NPT
POWER SUPPLY
VOLTS/PH/HZ/AMPS
115/1/60/10 115/1/60/15 115/1/60/20 115/1/60/20
DIMENSIONS
L x W x H (INCHES)
41x12x21 55x20x43 61x24x49 61x32x48
WEIGHT
(LBS)
86 240 330 378